It starts with a thorough cleaning and inspection of the heater and air conditioning unit(s) once during the coverage year. Access to the equipment is required. At the time, we also perform the following 21-Point Precision Tune-Up:
Air Conditioning – 21-Point Spring
- Check operating temperatures (evaporator temp drop)
- Check voltage of outdoor compressor
- Check and adjust supply and return vents if required
- Inspect motors and belts, if necessary lubricate moving parts
- Clean or replace standard air filter
- Check low voltage wiring and contactor
- Inspect condensate line
- Inspect condensate pump if applicable
- Check and if needed tighten all electrical connections
- Check for visual refrigerant leaks
- Check and if necessary adjust thermostat calibration supply/return
- Test humidistat operation if applicable
- Check cleanliness of ductwork
- Test safety and control circuits for proper operation
- Test float switch if applicable
- Inspect electronic air cleaners if applicable
- Check temperature differential
- Check fan motor amperage draw
- Inspect service valves
- Check and clean condenser coil, adjust fins
- Clean and adjust blower components operation
Customer consultation on condition of equipment
Air Conditioning – 21-Point Spring
- Perform heat exchanger inspection
- Clean and adjust all safety devices
- Inspect pilot and/or flame sensor
- Clean and inspect burners
- Inspect motors and if necessary
- Clean and/or replace 1” filter as needed
- Check for carbon monoxide leaks
- Test for natural gas leaks around furnace
- Check blower compartment for cleanliness
- Check furnace for proper cycling
- Measure temperature
- Check and adjust thermostat if necessary
- Check all electrical connections
- Inspect condensate line
- Inspect condensate pump if applicable
- Check for cleanliness of ductwork
- Inspect fan belt tension if applicable
- Check thermocouple if applicable
- Test ignition system for proper operation
- Measure blower motor volts/amps
- Test safety and control circuits for proper
Customer consultation on condition of equipment
MAINTENANCE AGREEMENT
Maintenance Plan Options
Plan #1 Air Conditioner (AC) Tune Up Only $109.00 (after Apr. 30th $139) $99.00
Plan #2 Hot Air Furnace Tune Up Only $109.00 (after Apr. 30th $139) $99.00
Plan #3 AC & Furnace Tune Up $210.00 (after Apr. 30th $268) $199.00
Plan #4 Heat Pump $210.00 (after Apr. 30th $289) $199.00
Plan #5 Hot Water Gas Boiler $175.00 (after Apr. 30th $199) $159.00
Optional Equipment (available with the purchase of one or more of the above plans)
Electronic Air Cleaner $35.00
Power Humidifier (includes pad) $38.00
Attic Fans $35.00
Water Heaters (Clean & Check) $38.00
On Demand Water Heaters (Clean & Check) $139.00